28-Gallon Dodge Promaster Wheel Well Water Tank - Center (PM-C-28)
The NW Conversions 28-gallon ProMaster wheel well water tank (PM-C-28) is designed specifically for the Ram ProMaster. It contours directly over the wheel housing, so you can build your bed or cabinetry flush against the wall without losing interior volume. AVC RIG carries it from GoCode.
ProMaster Wheel Well Water Tank Specifications
- Nominal dimensions: 48" L x 14" W x 20" H (actual dimensions may vary up to 1.5% each)
- Capacity: 28 gallons
- Dry Weight: 31 lbs
- Filled Weight: 264 lbs
- Recommended Sensor: KUS S5U-19
- Recommended Heating Pad: Facon CW-T1218 (x2)
- Not designed for pressurized systems, must be vented
Materials & Certifications
- BPA-free, food-grade plastic
- Made in the USA
- IAPMO TS 4 Certified
- TEi listed and RVIA approved
What's Included
- Water Tank
- (x2) Adjustable straps
- (x4) Mounting brackets
Ports & Plumbing
- (2) 1.5" NPT ports on either end, pre-marked, drill out to use
- (2) 1/2" NPT ports on either end, open and ready to use
- (1) 1.5" NPT port on top for fill or level sensor, pre-marked, drill out to use
Shipping & Lead Time
- Ships in 1-2 business days
Note: Despite great care taken during manufacturing and fulfillment, plastic tanks can become dirty and/or scuffed in transit. This does not constitute a damaged tank. Plastic tanks can also become slightly warped, especially on the flat surfaces. This is normal and does not render the tank defective. Maintaining a completely straight/flat surface on a rotationally molded part is not always possible, but we make every effort to keep surfaces within a 1.5 degree tolerance.
Compatibility
- ProMaster designed for a near-perfect fit over the factory wheel well
- Sprinter & Transit will fit securely with a gap around the top of the wheel well, ideal for insulation or sound deadening
- Compatible with other vehicles such as box trucks and trailers where dimensions allow
- Can be placed on either driver or passenger side
Planning Your ProMaster Wheel Well Water Tank
Because the ProMaster wheel well water tank sits over the wheel housing, it uses space that's hard to build around anyway. Pick a side, then plan your plumbing around the NPT ports on either end. The recommended KUS S5U-19 is the sender length for accurate level readings, and two Facon CW-T1218 pads are the recommended heating pad setup. Plan room for the heating pad on the tank before you close in the wheel housing. Remember the tank must be vented. A ProMaster wheel well water tank this size holds 28 gallons and weighs 264 lbs filled, so plan your mounting with that weight in mind. Find more parts in Ram ProMaster conversion parts and van conversion kits, and learn about the van at Ram.
